You are missing some Flash content that should appear here! Perhaps your browser cannot display it, or maybe it did not initialise correctly.

The Vilex Rail Fixation System

  The Vilex Rail Fixation System
Mini Rail: 600 Series
As shown to the left, this system consists of two identical carriages: one is stationery and the other traveling along a threaded shaft, attached to a miniature aluminum frame. Each carriage accepts a single clamp with two half pins. The main features of the 600 Series are:

Each clamp can rotate and can swivel 15 degrees up and down. A printed scale on the sides gives the distance traveled by the moving clamp from the extreme position. The standard clamp accepts 4 mm diameter pins only.

An optional smaller carriage is available, which accepts the smaller half pins.

Micro Rail: 600 Series
This system is identical to the 600 except that all components are smaller and lighter and the clamps accept only 3.0 mm diameter half pins. Again, each clamp can rotate and can swivel 15 degrees up and down. A printed scale on the sides gives the distance traveled by the moving clamp from the extreme position.

Regular Rail: 800 Series
This system consists of two identical carriages, traveling along a threaded shaft. Two set screws, one either side, secure the carriage to the threaded shaft. Each carriage can accept a half-pin clamp. The clamp can hold one or two half pins and can rotate in the horizontal plane.

Options
The Standard shaft lengths are 100 and 150 mm. Custom lengths are available upon request. The user may stack two clamps on top of the other, with each rotating in its horizontal plane independent of the other. The half pins will rotate in parallel planes. Clamps can be placed below the carriage also and they can be stacked as well.
Style Length Thread OD Thread Length Rail Type
500-060-020 60 mm 2.0 mm 20 mm 500/600
500-060-025 60 mm 2.5 mm 20 mm 500/600
500-060-030 60 mm 3.0 mm 20 mm 500/600
500-070-030 70 mm 3.0 mm 20 mm 500/600
500-090-030 90 mm 3.0 mm 30 mm 600/800
500-090-030S 90 mm 3.0 mm 10 mm 600/800
500-150-30 150 mm 3.0 mm 30 mm 600/800
500-150-30S 150 mm 3.0 mm 10 mm 600/800
500-175-40S 175 mm 4.0 mm 10 mm 600/800
500-175-40M 175 mm 4.0 mm 20 mm 600/800
500-175-40L 175 mm 4.0 mm 30 mm 600/800
500-175-50S 175 mm 5.0 mm 10 mm 800
500-175-50M 175 mm 5.0 mm 20 mm 800
500-175-50L 175 mm 5.0 mm 30 mm 800
500-175-60S 175 mm 6.0 mm 10 mm 800
500-175-60M 175 mm 6.0 mm 20 mm 800
500-175-60L 175 mm 6.0 mm 30 mm 800